Join to our channels: new products, coupons, best deals:
Racing Frames
SabotageRC Frigate 7
Multirotors → FPV Racing drones → Racing Frames → 7" frames → SabotageRC Frigate 7
The Frigate frame was designed to support bigger, heavier motors. While the Mongoose focuses on lightweight durability with separate ESC’s, the Frigate focuses on sheer power and 4in1 ESC’s. Along with the beefier design comes the ability to introduce longer arms. The 7” arms are 14.5mm wide. The 7" arms also have a larger motor mounting base to protect those big 24xx and 25xx motors. The Frigate uses the same camera mount posts as the Mongoose, but they are swiveled by 180 deg so that the mounting point is on the front of the standoff, instead of the back. The 7" has 25mm available for your stack. The base plate and top plate are shared with all models of the Frigate series. It supports 20mm, 24mm or 30.5mm stacks on the 3mm thick main plate.
ATTENTION:
Frigate 7 arms are not symmetrical. They curve slightly outwards. If arms are installed upside down, props come extremely close to touching each other.
| Included |
| Carbon fiber |
| 4x arms |
| 1x top plate |
| 1x bottom plate |
| Aluminium |
| 2x cam mounting alumi standoffs |
| 2x M3 20mm standoff |
| Hardware Metal |
| 4x M3 6mm iron bolts |
| 8x M3 12mm iron bolts |
| 4x M3 nylocks |
| 2x M2 5mm cuphead iron bolts (cam mount) |
| 4x 16mm iron bolts (FC stack) |
| Hardware Nylon |
| 4x M3 nylon nuts (FC stack) |
| 4x M3 nylon 6mm standoffs (FC stack) |
| Other |
| lipo foam pad |
| 4x dog bone foam landing pads |
| 1x lipo strap |
Frame weight 93.5g
See also
Join to our channels: new products, coupons, best deals: